Home / No-heat checklist
Furnace not working? Try this checklist first
Five quick checks fix a surprising number of no-heat calls. Safety comes first: if you smell gas or a CO alarm is sounding, stop here and leave the house.
1. Thermostat
Set to Heat, a few degrees above room temperature. If the screen is blank, replace the batteries.
2. Power to the furnace
Check the furnace switch (it looks like a light switch near the unit) and the breaker.
3. Furnace filter
A badly clogged filter can make a furnace shut itself off. Replace or clean it.
4. Outside intake and exhaust pipes
Make sure the white pipes on the outside wall are not blocked by snow or ice.
5. Gas supply
If other gas appliances (stove, water heater) also do not work, it may be a gas supply problem. Call ATCO's emergency line.
Still no heat?
Time to call a technician. Tell them which checks you tried.
Glad that worked
If the furnace keeps shutting off, book a tune-up. Repeated shutdowns usually mean a worn part. The repair-or-replace tool can help you decide what to do next.
Sources
- ATCO Gas: outages and emergencies
- ATCO Gas: report a gas emergency (leave first, then call)
- Alberta Municipal Affairs: carbon monoxide alarm safety tip
Figures are guides, not quotes. Prices and rules change; confirm with your contractor and the City of Edmonton. Last reviewed November 2026.
Need heat back on in Edmonton?
Call now to reach a licensed technician, or send a quick request.